Special high-density paint, in a handy spray can, for the quick touch-up of fibreglass parts coated with gelcoat and polyester resin. It restores the treated parts in a uniform way and allows an excellent and fast covering, levels the superficial porosity and does not drip.
For antifoulings such as Propeller Primer, Sentiflex, Stucco Velox, Ticoprene AL, Timber Gloss and Unigloss.
Suitable for painting supports made of neoprene, rubber cloth, PVC and other materials. Excellent dilatation, flexibility and adhesion. High resistance to the marine environment, to immersion in fresh and salt water and to ultraviolet rays.
Key Features:Excellent resistanceEase of applicationAesthetic depthGood dilatation
Adherpox two component epoxy primer - Veneziani
Key Features:High glossWeather resistantExcellent dilatation Can be used both for interior and exterior applications
Alkyd resin-based glossy finishing enamel for exterior and interior use. Its main features are good coverage, brightness, good brushability. Suitable for marine and industrial environments.
Thinner 6780 is suitable for the dilution of Antifouling 55TF, Gel Gloss pro, Polyrex pro, Wood Gloss, Wood Mat.Only for cleaning tools used to apply Adherglass and Fibrodur.
Adherglass primer anchor for fiberglass - Veneziani
Thinner 6380 is suitable for Gummipaint and Gummipaint A/F, for brush and spray applications.
Attention: In all types of packaging, to maintain the correct 2:1 mixing ratio by weight, 1 pumping of component A and 1 pumping of component B must be done.
Very fine white opalescent powder, very light, which has the property of making liquid materials pasty and dense.
Thinner 6610 is suitable for thinning Adherpox, Epoxy Primer, Plastolite pro, Unikote and Unikote Yachting.Only for cleaning tools used to apply Aquastop, CeramiteYachting, Resina 2000, Epomast, Epomast pro, Epomast Rapido, Subcoat S, Ecoplast.
Product in pure blond bristle for application of enamels and paints.
Unigloss is a superior enamel with a single component, high quality alkyd-polyurethane finish.
Very fine greenish-white, premixed, threadlike glass fragment to remain even vertically as a putty when added to 10 10 CFS.
It contains white microspheres and other additives that give the mixture thixotropic characteristics (it remains vertical). It is an ultralight stucco with a structure comparable to a cuttlefish bone, as it is light (it floats), resistant, self-supporting and unalterable, ideal for making kerbs.
Glossy varnish for exteriors and interiors, very resistant to weathering and exposure to marine environments, where the maintenance of wood of alltypes requires maximum protection.
Specific thinner for one-pack Spinnaker varnishes. Only add to the first coat on new or restored wood from 10 l 40% depending on the hardness and the characteristics of the wood. In the following coats from 3 to 5% if necessary. Ideal for the maintenance and cleaning of brushes.
Matt varnish for exteriors and interiors. It is the matt version of the glossy type, with the same technical characteristics. It is designed to be used both indoors and outdoors and, of course, it is just as reliable, resistant and does not require sanding between coats (COD technology - Coat Over Dry, 48 hours in summer, 72 hours in winter).