Galvanized steel bruce type anchor.
Fenders in E.V.A. (Ethylene, Vinyl Acetate, Copolymer), new floating material with closed cells. Leaves no stains or residue on the boat's hull. For piers, fixed and floating docks, quays and protections in general.With anchor bolts and washers for assembly.
Handy, light and easy to apply mandatory for Sphaera fender profile.
PVC top cover. For Radial fender profile.
The special feature of this profile is that it can be applied cold in just a few quick steps. It requires a channel for Radial.
High flow and high pressure inflator-inflator. Flow rate lt/min 450, adjustable pressure up to mbar 800 (4,4 psi). Alim. 12V-13A.Automatic stop at the chosen pressure.Suitable for traditional inflatable boats. Equipped with 7 Ah rechargeable battery that allows an autonomy of about 15 minutes at full load. Dim. mm. 180x200x300. Weight kg. 4.8.
New 12V-45/60A inflator capable of inflating maxi inflatable boats in a few minutes. Capacity lt/min 1000, maxmbar pressure 250 (7 mt inflatable boat in 7 minutes).equipped with 2 powerful motors mounted on an aluminum plate to dissipate heat.power cable and tube each dimt 3. dim. mm. 310x190x180 h. Weight kg. 3,5
Collar for Sail Drive 120 (ref. or. 876286 - 851983).
An anchor of new conception, fast penetration and excellent hold, thanks to its ballasted tip and its very wide ploughshare. The exceptional performance of the Kobra is the result of its special geometry which allows you to choose it up to two sizes below the weight of the anchors usually recommended. In many international tests, it has been found to be...
Inflatable fender Performance two colours in flexible, bright and UV resistant PVC. Can be used horizontally or vertically. Thanks to the design of the ends whatever the point of impact on the fender shock absorption is optimal.
Remo in anodized light alloy Ø 35 mm. divisible on the blade in grey colour. With hole on the sleeve for scales with pin.
High speed and high pressure inflator-inflator lt/min 450. Adjustable pressure up to mbar 800 (11,7 psi). Suitable for rubber dinghies with inflatable bottom. Automatic stop at the chosen pressure. Alim. 12V-13 Amp. Dim. mm. 180x200x240. Weight kg. 1,9
Wall mounted storage pocket, color white. With white object holder.
Stainless steel / galvanized mooring spring
Manufactured in specific HR stainless steel. Equipped with anti-corner caps in order to improve noiselessness.Equipped with anti-slackening limit switches and the special heads allow a perfect axiality during the conversion.
Orients the anchor in the correct position when the attachment reaches the nose pulley.Direct connection to the anchor and to the chain by means of a cardan joint, no shackle required. Its resistance is tripled with respect to existing models. Assembled with pin anti-unscrewing safety screws.
AISI 316 stainless steel joint to join the anchor to the chain. Its ogival shape allows a perfect sliding of the chain and the anchor on the bow.
Nylon hook for elastic braid for inflatable boats.
Plastic clip to stop oars, sailors or handles in general, fixed with 2 screws. Conf. 20 pcs.
Hand-finished, protects against scoring, wear and tear and fender rub on the hull. Color Navy Blue, single pack.