Trim correctors, react instantly to boat speed and water pressure, changing trim when necessary. At slow speeds, before planing, the cylinders push down on the plates, lowering the bow and keeping the boat in trim. On planing, the boat's speed increases and the water pressure pushes the plates up.
12 V electromechanical attitude correctors, complete with control panel.It is a new mechanism enclosed in the cylinder; an electric motor drives a series of gears which in turn drive the piston.They are precise and powerful, comparable to hydraulic models.
LED indicator of the flap angle, scale from 0 to 100, with possibility of adjusting the light intensity of the LEDs and the backlighting.
The special shape of the blades provides 30% more glide force than traditional flaps. Thanks to their space-saving design, they can be installed on any transom.
Mounts directly on the hydraulic cylinders and connects to the position indicators. Complete with 6 mt. of cable.Green cable: rightRed cable: left
Spare part for Flap Bennett, mt. 6, internal Ø mm. 4, external Ø mm.6,5.
Spare part for Flap Bennett.
AC actuator complete with brackets and electric connection cable 1 m long, actuation stroke mm.57
Very easy to install, simply attach to the transom near the flaps. Completely watertight and equipped with 12 m cable and steel brackets for installation. They can be combined with the panel cod. HA1162.
EIC 2000 trim indicator panel, completely watertight, led with the possibility of varying the light intensity day/night. Complete with ATR command (AutotabRetractor), when the ignition key is turned off it automatically retracts the boards, with sensors with 6 m. of cable and a junction box to facilitate the assembly. For single station.
Relay is used to protect the electro-hydraulic control unit.
Pair of mirror polished stainless steel boards.
Solenoid valve red cable
Solenoid valve green cable