List of products by brand Kong

The origins of Kong start way back, exactly in 1830 in a mechanical workshop located at the foot of the Alps, where Giuseppe Bonaiti started our history, writing important pages of Made in Italy. The entire production cycle, from design to packaging, takes place within the 10,000 square meters of the factory in Monte Marenzo (LC) Italy, where each PPE is tested piece by piece and sold worldwide.

AISI 316 stainless steel pear-shaped carabiner
  • -41.5%
Nautical snap hook
Kong

AISI 316 stainless steel pear-shaped snap hook

kr53.42 kr91.32
Key-Lock closure.
AISI 316 stainless steel carabiner with cross opening
  • -41.5%
Nautical snap hook

AISI 316 stainless steel carabiner with cross opening

kr136.82 kr233.88
"GENIUS" model with cross-opening providing greater passage. Key-Lock closure.
AISI 316 stainless steel snap hook with ring
Nautical snap hook
Kong

AISI 316 stainless steel snap hook with ring

kr113.04
Pear-shaped model but with a ring in the eye. Key-Lock closure.
Chain Gripper, Stainless Steel Anchor Shackle Chain Gripper, Stainless Steel Anchor Shackle 2
  • -41.5%
Nautical Cricket
Kong

Chain Gripper, Stainless Steel Anchor Shackle

kr174.45 kr298.20
Chain Gripper isa stainless steel anchor shackle with a captive pin.Most useful because it makes it easy to connect the second anchor to the main chain without reducing the workload.
AISI 316 stainless steel carabiner - Key-Lock closure
  • -41.5%
Nautical snap hook
Kong

AISI 316 stainless steel carabiner - Key-Lock closure

kr52.09 kr89.04
High quality model, wide opening and large breaking load.
AISI 316 stainless steel asymmetrical model carabiner
  • -41.5%
Nautical snap hook
Kong

Carabiner asymmetrical model in AISI 316 stainless steel

kr83.40 kr142.56
New shape that offers very high strength and a large opening. Key-Lock Closure.
AISI 316 stainless steel carabiner - Key-Lock spring plunger closure.
  • -41.5%
Nautical snap hook
Kong

AISI 316 stainless steel carabiner - Key-Lock spring plunger closure.

BA0557
kr135.84 kr232.20
AISI 316 stainless steel snap hook. Model with spring plunger closure, external opening. Key-Lock closure. Dimensions: Ø 10mm. Length 100mm. Breaking load 1200kg.
Colored light alloy carabiner - Key-Lock closure.
  • -41.5%
Nautical snap hook
Kong

Colored light alloy carabiner - Key-Lock closure.

kr52.51 kr89.76
Pear model.
Polished brass snap hook - Swivel eye.
  • -41.5%
Nautical snap hook
Kong

Polished brass snap hook - Swivel eye.

kr46.89 kr80.16
Polished brass snap hook - Swivel eye.
Oval carabiner
  • -41.5%
Nautical snap hook
Kong

Oval carabiner

IA1329
kr94.84 kr162.12
Oval carabiner
Approved towing hook carabiner 59 mm. - Kong Approved towing hook carabiner 59 mm. - Kong 2
Water ski accessories
Kong

Approved carabiner towing hook 59 mm. - Kong

AB7368
kr360.84
Stainless steel quick release carabiner for water skiing. In case of emergency the connector immediately even under load by pulling the lanyard. Maximum load Kg 1000. RINA approved. Length mm 59
Stainless steel swivel anchor joint for Ø 6/8 mm chains - Kong
  • -41.5%
Arrived again
Kong

Stainless steel swivel anchor joint for Ø 6/8 mm chains - Kong

AB8128
kr570.02 kr974.40
Stainless steel joints for connecting the anchor to the chain. Their ogival shape allows the chain and anchor to slide perfectly on the bow roller. Swivel model. Lateral breaking load 850 kg, vertical working load 2500 kg. For chain diameter 6-8 mm.
Stainless steel swivel anchor joint for chains Ø 8/12 mm. - Kong
  • -41.5%
Arrived again
Kong

Stainless steel swivel anchor joint for Ø 8/12 mm chains. - Kong

AB8129
kr1,026.04 kr1,753.92
Stainless steel joints to join the anchor to the chain. Their ogival shape allows perfect sliding of the chain and anchor over the bow nose. Swivel model. Lateral breaking load kg.2000, vertical working load kg.5000. For chain Ø mm. 8-10-12.
Stainless steel swivel anchor joint for chains Ø 12/14 mm. - Kong
  • -41.5%
Out-of-Stock
Arrived again
Kong

Stainless steel swivel anchor joint for chains Ø 12/14 mm. - Kong

AB8130
kr3,420.14 kr5,846.40
Stainless steel joints to join the anchor to the chain. Their ogival shape allows perfect sliding of the chain and anchor over the bow nose. Swivel model. Lateral breaking load kg.3000, vertical working load kg.9500. For chain Ø mm. 12-14.
View
Product added to wishlist