Flap boat

Flap boat - The best brands online | HiNelson

One of the priorities for anyone who is accustomed to sailing at sea concerns the balance that the boat must maintain, especially in cases of not particularly calm and tranquil waters. Boat flaps serve this very purpose and have now become an essential element of any hull: these are two devices that, mounted to the right and left of the stern, are regulated by the boat's electrical and hydraulic mechanisms and allow the entire boat system to remain balanced even in difficult conditions.

One of the priorities for anyone who is accustomed to sailing at sea concerns the balance that the boat must maintain, especially in cases of not particularly calm and tranquil waters. Boat flaps serve this very purpose and have now become an essential element of any hull: these are two devices that, mounted to the right and left of the stern, are regulated by the boat's electrical and hydraulic mechanisms and allow the entire boat system to remain balanced even in difficult conditions.

Read more

Showing 1-24 of 29 item(s)

Tactile Switch waterproof panel and control box - Lenco

Tactile Switch waterproof panel and control box - Lenco 2

-12%

Flap boat

Tactile Switch watertight panel and control box - Lenco

€215.16 €244.50

Watertight panel + control box with Deutsch Connectors outputs.Plug&Play wiring and Retractor function that retracts flaps when power is removed. 92 cm power cables.In LED version, power on every 5 mm of movement

Bennett fitting kit

-22%

Flap boat

Fitting kit Bennett

€45.86 €58.79

Replacement for Flap Bennett.

Lenco Standard flap kit 229...

-15%

Flap boat

Lenco Standard flap kit 229 x 457 mm.

€703.31 €827.43

Attitude corrector kit Standard AssemblyTables made of stainless steel with a flared trailing edge. Corrosion-resistant upper and lower mounting brackets.Kit consists of:- 2 actuator cylinders (5426001 Original Ref. 15054-001)- 2 stainless steel ailerons- 2 6-meter extensionsControl panel sold separately

Tactile Switch Control Panel - Lenco 27645

-12%

Flap boat

Tactile Switch Control Panel - Lenco

€456.72 €519.00

Waterproof control box panel with Deutsch Connectors outputs. Wiring Plug

Lenco Performance HD 140 x 120 mm flap kit.

-15%

Flap boat

Lenco Performance HD 140 x 120 mm flap kit.

€1,316.65 €1,549.00

Heavy Duty Performance HD trim corrector kit

Spare electromechanical cylinder

Spare electromechanical cylinder 2

-5%

Flap boat

EM electromechanical flaps system

€564.30 €594.00

Kit consisting of 2 12 V cylinders and an "Up-Down" control panel.

Lenco Super 24 V flap kit single actuator

-15%

Flap boat

Lenco Super 24 V flap kit single actuator

€1,431.40 €1,684.00

Super Strong trimmer kit

Lenco Super flap kit 406 x 765 mm

-15%

Flap boat

Lenco Super flap kit 406 x 765 mm

€2,013.65 €2,369.00

Super Strong trimmer kit

Lenco Standard flap kit 229 x 610 mm.

-15%

Flap boat

Lenco Standard flap kit 229 x 610 mm.

€866.15 €1,019.01

Standard Mount trimmer kit

Lenco Super 305 x 610 mm flap kit

-15%

Flap boat

Lenco Super 305 x 610 mm flap kit

€1,274.15 €1,499.00

Super Strong trimmer kit

Kit flap Lenco Performance HD 180 x 140 mm.

-15%

Flap boat

Kit flap Lenco Performance HD 180 x 140 mm.

€1,422.90 €1,674.00

Kit correttori d'assetto Heavy Duty Performance HD

Lenco Performance HD 160 x 120 mm flap kit.

-15%

Flap boat

Lenco Performance HD 160 x 120 mm flap kit.

€1,363.40 €1,604.00

Heavy Duty Performance HD trim corrector kit

Flap kit without boards 12V - Bennett

-17.5%

Flap boat

Flap kit without boards 12V - Bennett

€665.20 €806.30

They have the function of facilitating the achievement of glide and positioning the boat in its optimal trim. The advantages are increased speed, reduced fuel consumption and improved visibility while sailing. The system consists of an electro-hydraulic flaps control unit, 2 actuator cylinders (length mm 350, stroke mm 63) without external hydraulic...

Kit flap senza tavole 24V - Bennett

-17.5%

Flap boat

Kit flap senza tavole 24V - Bennett

€688.75 €834.85

Hanno la funzione di agevolare il raggiungimento della planata e il posizionamento della barca nel suo assetto ottimale. I vantaggi sono: incrementodella velocità, riduzione dei consumi e migliore visibilità in navigazione. Il sistema è composto da una centralina flaps elettro idraulica, 2 cilindriattuatori (lung. mm 350, corsa mm 63) senza connessioni...

Bennett M80 flap kit with 250x300 mm plates.

-17.5%

Flap boat

Bennett M80 flap kit with 250x300 mm plates.

€1,068.77 €1,295.48

Trim correctors for small boats. The special shape of the blades provides 30% more force in glide than conventional flaps. Due to their space-saving design they can be installed on any transom. Kit contains: electro-hydraulic flaps control unit with oil tank, 2 actuator cylinders (length mm.290, stroke mm. 58), 2 stainless steel boards, fittings,...

12 V electromechanical attitude correctors complete with control panel

12 V electromechanical attitude correctors complete with control panel 2

-39%

Flap boat

12 V electromechanical trim correctors complete with control panel

€409.50 €671.32

12 V electromechanical trim correctors, complete with control panel.It is a new mechanism enclosed in the cylinder; an electric motor drives a series of gears that in turn drive the piston.They are precise and powerful, comparable to hydraulic models.

Kit flap Lenco Edge 305 x 305 mm.

-15%

Flap boat

Kit flap Lenco Edge 305 x 305 mm.

€729.11 €857.78

Kit correttori d’assetto Montaggio EdgeTavole realizzate in acciaio inox con un bordo risvoltati. Staffe di montaggio superiori e inferiori resistenti alla corrosione. Adatto a imbarcazionidove c’è poco spazio a poppa.Kit composto da:- 2 cilindri azionatori (5426001 Rif. Originale 15054-001)- 2 alettoni in acciaio inox- 2 prolunghe da 6 metripannello di...

Kit flap Lenco Standard 305...

-15%

Flap boat

Kit flap Lenco Standard 305 x 610 mm.

€878.19 €1,033.17

Kit correttori d’assetto Montaggio StandardTavole realizzate in acciaio inox con un bordo d’uscita svasato. Staffe di montaggio superiori e inferiori resistenti alla corrosione.Kit composto da:- 2 cilindri azionatori (5426001 Rif. Originale 15054-001)- 2 alettoni in acciaio inox- 2 prolunghe da 6 metripannello di controllo venduto separatamente

Kit flap Lenco Standard 305...

-15%

Flap boat

Kit flap Lenco Standard 305 x 457 mm.

€751.10 €883.65

Kit correttori d’assetto Montaggio StandardTavole realizzate in acciaio inox con un bordo d’uscita svasato. Staffe di montaggio superiori e inferiori resistenti alla corrosione.Kit composto da:- 2 cilindri azionatori (5426001 Rif. Originale 15054-001)- 2 alettoni in acciaio inox- 2 prolunghe da 6 metripannello di controllo venduto separatamente

Bennett M80 flap kit with 200x250 mm plates.

-17.5%

Flap boat

Bennett M80 flap kit with 200x250 mm plates.

€1,002.75 €1,215.45

Trim correctors for small boats. The special shape of the blades provides 30% more force in glide than conventional flaps. Due to their space-saving design they can be installed on any transom. Kit contains: electro-hydraulic flaps control unit with oil tank, 2 actuator cylinders (length mm.290, stroke mm. 58), 2 stainless steel boards, fittings,...

Lenco Standard 229 x 305 mm...

-15%

Flap boat

Lenco Standard 229 x 305 mm flap kit.

€652.67 €767.84

Attitude corrector kit Standard AssemblyTables made of stainless steel with a flared trailing edge. Corrosion-resistant upper and lower mounting brackets.Kit consists of:- 2 actuator cylinders (5426001 Original Ref. 15054-001)- 2 stainless steel ailerons- 2 6-meter extensionsControl panel sold separately

Kit flap Lenco Edge 305 x 229 mm.

-15%

Flap boat

Kit flap Lenco Edge 305 x 229 mm.

€693.76 €816.19

Kit correttori d’assetto Montaggio EdgeTavole realizzate in acciaio inox con un bordo risvoltati. Staffe di montaggio superiori e inferiori resistenti alla corrosione. Adatto a imbarcazionidove c’è poco spazio a poppa.Kit composto da:- 2 cilindri azionatori (5426001 Rif. Originale 15054-001)- 2 alettoni in acciaio inox- 2 prolunghe da 6 metripannello di...

Kit flap Lenco Racing HP

-15%

Flap boat

Kit flap Lenco Racing HP

€1,791.74 €2,107.93

Kit correttori d’assetto High Performance HPTavole realizzate in acciaio inox elettrolucidato con cerniere per impieghi gravosi. Staffe di montaggio superiori e inferiori resistenti alla corrosione.Progettate per applicazioni con più motori e spazio di poppa limitato. Il design della lama sagomata consente uno spazio extra per fargirare i motori. Adatta a...

Extension from control to bolt control unit

-15%

Out-of-Stock

Flap boat

Bolt control to control unit extension

€94.98 €111.74

Cable extension extension from control box to control box. Required with controlbox installation

View

1
2

Boat steering, flaps, wheelhouses and steering wheels

Product added to wishlist