Surface preparation
Do not apply in direct sunlight or on hot surfaces.
Apply between 10°C (50°F) and 30°C (86°F).
Do not use wire brushes to scrub the surface.
Protect surfaces you do not wish to treat.
Always test on a small inconspicuous area first.
Use appropriate protective clothing: gloves, goggles, etc..
Apply Owataud to the surface using a brush or sprayer.
Leave on for 5 minutes.
Wipe the surface with a clean cloth or abrasive sponge.
Rinse with clean, fresh water.
Repeat the process if necessary.
TIP: For very dirty surfaces, soak a cloth or abrasive sponge in Owataud and rub over the surface in circular motions. If the surface is too hot, moisten with water to cool before applying Owataud.
Note: Owataud-soaked cloths should be spread out to dry before disposal
Keep leftover product in the original container. Close the lid tightly after use. Keep away from frost and high temperatures.