Prepare a diluted solution according to the level of surface contamination (see dilution instructions below for more information). Stir or shake the solution well to make sure Owaclean is well mixed.
Apply the diluted Owaclean solution to the surface using a brush, sponge, roller or pump sprayer and allow it to work for 10 minutes. Do not allow the solution to dry on the surface while working.
Rinse the surface with fresh, clean water using a hose, pressure washer or bucket and sponge (change the water regularly). Using a pressure washer will ensure better dirt removal.
After cleaning, check that the surface is clean by spraying water. If water droplets form, the surface is not clean and the process should be repeated.
Adjust the dilution according to the degree of contamination of the surface.
Dirty surfaces: 1 part Owaclean in 20 parts water
Very dirty surfaces: 1 part Owaclean in 10 parts water
Owaclean is a concentrated formula. Do not use undiluted.
Clean all tools and equipment with fresh water.
Cover anything you do not wish to clean
Apply between 10°C and 25°C
Do not apply in direct sunlight or on hot surfaces
When applying by spray, adjust the nozzle to avoid misting
Always test on a small inconspicuous area first
Use appropriate protective clothing: gloves, goggles, etc.
